JSON Format

List of Data Point Types

The file must contain the list of the Data Point Types to be created. Specifically, the file contains an element (property) named DPTData containing an element named DPTS that is a list of Data Point Type descriptions.

Example:

{

"DPTData": {

"DPTS": [ ...<list of DPTs description>...]

}

Data Point Type

For each Data Point Type to be created, it is necessary to specify the following data:

Data Point Type Data
Data	Use	Description
Name	Mandatory	Value used as name of the WinCC OA Data Point Type. NOTE: This name must be a unique value in the database instances names.
DPES	Mandatory	List of Data Point Elements. For details, see Table Data Point Element.

Example:

{

"DPTData": {

"DPTS": [

{

"Name": "Test_NormalPoint",

"DPES": [ ...<list of DPEs description>... ]

}

]

}

Data Point Element

For each Data Point Element to be created, it is necessary to specify the following data:

Data Point Element Data
Data	Use	Description
Name	Mandatory	Value used as name of the WinCC OA Data Point Element, NOTE: This name must be a unique value in the DPT (or internal structure).
PvssType	Mandatory	An object describing the data type of the element. For details, see Table Data Point Element Data – PvssType.

PVSSTYPE Object

The PVSSTYPE object describes the data type of the element. It is necessary to specify the following:

Data Point Element Data – PvssType
Data	Use	Description
PvssType	Mandatory	String representing the data type of the element. If the element is a reference, also the referenced Data Point Type must be specified in the Ref property. If the element is a structure, all its internal Data Point Elements must be defined in the DPES property. If the type is a set, the element of the set must be specified in the DPES property. For details about the acceptable values, see Table Element Types.
Ref	Mandatory, in case the element is a reference.	Name of the referenced data point type.
DPES	Mandatory, in case the element is a structure or a set.	List of internal DPEs description.
Status	Optional	Object representing an extension of the PvssType configuration. The content of this object depends on the PvssType specified. For details, see Table Data Point Element Status. The empty object (“Status”: { }) resets data.
ArrayAttributes	Optional	Object representing an extension of the PvssType configuration. The content of this object depends on the PvssType specified and is valid only in case of arrays. For details, see Table Data Point Element ArrayAttributes. The empty object (“ArrayAttributes”: { }) resets the data.

Example:

{

"DPTData": {

"DPTS": [

{

"Name": "Test_NormalPoint",

"DPES": [

{ "Name": "Char_Value", "PVSSTYPE": { "PvssType": "CHAR" } },

{ "Name": "UInt_Value", "PVSSTYPE": { "PvssType": "UINT" } },

{ "Name": "Enum_Value", "PVSSTYPE": { "PvssType": "UINT" } },

{ "Name": "Int_Value", "PVSSTYPE": { "PvssType": "INT" } },

{ "Name": "Float_Value", "PVSSTYPE": { "PvssType": "FLOAT" } },

{ "Name": "Bool_Value", "PVSSTYPE": { "PvssType": "BOOL" } },

{ "Name": "Bit32_Value", "PVSSTYPE": { "PvssType": "BIT" } },

{ "Name": "Duration_Value", "PVSSTYPE": { "PvssType": "UINT" } }

]

}

]

}

Element Types
Type String	Description
STRUCT	Structure
CHAR	Character
UINT	Unsigned integer
INT	Integer
FLOAT	Double
BOOL	Boolean
BIT	Bit Pattern
STRING	Text
TIME	Data-Time
DPID	Data Point Instance Reference
LANGSTRING	Multilanguage text
BLOB	Blob
BIT64	64-bit pattern
LONG	64-bit integer
ULONG	64-bit unsigned integer
REF	Reference to another existing data point type
ARRAYCHAR	Dynamic array of characters
ARRAYUINT	Dynamic array of unsigned integers
ARRAYINT	Dynamic array of integers
ARRAYFLOAT	Dynamic array of doubles
ARRAYBOOL	Dynamic array of booleans
ARRAYBIT	Dynamic array of bit patterns
ARRAYSTRING	Dynamic array of texts
ARRAYTIME	Dynamic array of date-time values
ARRAYDPID	Dynamic array of data point instance references
ARRAYLANGSTRING	Dynamic array of multilanguage texts
ARRAYBLOB	Dynamic array of blob values
ARRAYBIT64	Dynamic array of 64-bit patterns
ARRAYLONG	Dynamic array of 64-bit integers
ARRAYULONG	Dynamic array of 64-bit unsigned integers
SETCHAR	Set of character elements
SETUINT	Set of unsigned integer elements
SETINT	Set of integer elements
SETFLOAT	Set of double elements
SETBOOL	Set of Boolean Elements
SETBIT	Set of Bit Pattern Elements
SETSTRING	Set of Text Elements
SETTIME	Set of Date-Time Elements
SETDPID	Set of Data Point Instance Reference Elements
SETLANGSTRING	Set of Multilanguage Text Elements
SETBLOB	Set of Blob Elements
SETBIT64	Set of 64-bits pattern elements
SETLONG	Set of 64-bit integer elements
SETULONG	Set of 64-bit unsigned integer elements

It is also possible to define in the JSON file some mandatory Data Points Elements that must be added to all the Data Points Types created.

In this case, the syntax to be used is the same as for the standard Data Point Type, but the name of the Data Point Type must be an asterisk (*).

Example:

{

"DPTData": {

"DPTS": [

{

"Name": "*",

"DPES": [

{ "Name": "MyMandatoryFields", "PVSSTYPE": { "PvssType": "REF", "Ref": "_GmsMyMandatoryFields" } }

]

{

"Name": "Test_NormalPoint",

"DPES": [

{ "Name": "Char_Value", "PVSSTYPE": { "PvssType": "CHAR" } },

{ "Name": "UInt_Value", "PVSSTYPE": { "PvssType": "UINT" } },

{ "Name": "Enum_Value", "PVSSTYPE": { "PvssType": "UINT" } },

{ "Name": "Int_Value", "PVSSTYPE": { "PvssType": "INT" } },

{ "Name": "Float_Value", "PVSSTYPE": { "PvssType": "FLOAT" } },

{ "Name": "Bool_Value", "PVSSTYPE": { "PvssType": "BOOL" } },

{ "Name": "Bit32_Value", "PVSSTYPE": { "PvssType": "BIT" } },

{ "Name": "Duration_Value", "PVSSTYPE": { "PvssType": "UINT" } }

]

}

]

}

As every Data Point Type must have references to _GmsRelatedItems and _GmsStatusPropagation, those references – if not present in the file - are automatically added during the import and it is not necessary to declare them in the JSON file.

Also, the property SuppressAlarms is automatically added, if not present in the JSON file, and in this case, it is configured with the standard configuration data. If it is necessary to set different values, with respect to the default ones, the property SuppressAlarms must be explicitly added to the JSON file.

Example JSON File for Object Models with the Same Data Point Types Configuration as the CSV file

NOTICE

The following sample is to be intended as an example of file and not as a template. If you want to make a copy of it and create your own file to import, verify its content carefully and enter the data point types that you want to create. In particular, pay attention to the mandatory DPEs section.

{

"DPTData": {

"DPTS": [

{

"Name": "*",

"DPES": [

{ "Name": "MyMandatoryFields", "PvssType": { "PvssType": "REF", "Ref": "_GmsMyMandatoryFields" } }

]

{

"Name": "Test_NormalPoint",

"DPES": [

{ "Name": "Char_Value", "PvssType": { "PvssType": "CHAR" } },

{ "Name": "UInt_Value", "PvssType": { "PvssType": "UINT" } },

{ "Name": "Enum_Value", "PvssType": { "PvssType": "UINT" } },

{ "Name": "Int_Value", "PvssType": { "PvssType": "INT" } },

{ "Name": "Float_Value", "PvssType": { "PvssType": "FLOAT" } },

{ "Name": "Bool_Value", "PvssType": { "PvssType": "BOOL" } },

{ "Name": "Bit32_Value", "PvssType": { "PvssType": "BIT" } },

{ "Name": "Duration_Value", "PvssType": { "PvssType": "UINT" } }

]

{

"Name": "Test_PointWithRef",

"DPES": [

{ "Name": "String_Value", "PvssType": { "PvssType": "STRING" } },

{ "Name": "Time_Value", "PvssType": { "PvssType": "TIME" } },

{ "Name": "DpId_Value", "PvssType": { "PvssType": "DPID" } },

{ "Name": "LangString_Value", "PvssType": { "PvssType": "LANGSTRING" } },

{ "Name": "Blob_Value", "PvssType": { "PvssType": "BLOB" } },

{ "Name": "Reference_Value", "PvssType": { "PvssType": "REF",

"Ref": "_Gms_TestReference" } }

]

{

Name": "Test_PointWithStruct",

"DPES": [

{

"Name": "Struct_Value",

"PvssType": {

"PvssType": "STRUCT",

"DPES": [

{ "Name": "Int_Value", "PvssType": { "PvssType": "INT" } },

{ "Name": "String_Value", "PvssType": { "PvssType": "STRING" } },

{

"Name": "Struct_Internal",

"PvssType": {

"PvssType": "STRUCT",

"DPES": [

{ "Name": "Float_Value", "PvssType": { "PvssType": "FLOAT" } },

{ "Name": "Reference_Value", "PvssType": { "PvssType": "REF",

Ref": "_Gms_TestReference" } }

]

}

]

}

]

{

"Name": "Test_PointWithArray",

"DPES": [

{ "Name": "ArrChar_Value", "PvssType": { "PvssType": "ARRAYCHAR" } },

{ "Name": "ArrUInt_Value", "PvssType": { "PvssType": "ARRAYUINT" } },

{ "Name": "ArrInt_Value", "PvssType": { "PvssType": "ARRAYINT" } },

{ "Name": "ArrFloat_Value", "PvssType": { "PvssType": "ARRAYFLOAT" } }

]

{

"Name": "Test_PointWithSet",

"DPES": [

{

"Name": "SetChar_Value",

"PvssType": {

"PvssType": "SETCHAR",

"DPES": [

{ "Name": "Char1", "PvssType": { "PvssType": "CHAR" } },

{ "Name": "Char2", "PvssType": { "PvssType": "CHAR" } }

]

}

{

"Name": "SetUint_Value",

"PvssType": {

"PvssType": "SETUINT",

"DPES": [

{ "Name": "UInt1", "PvssType": { "PvssType": "UINT" } },

{ "Name": "UInt2", "PvssType": { "PvssType": "UINT" } },

{ "Name": "UInt3", "PvssType": { "PvssType": "UINT" } }

]

}

]

}

]

}

Data Point Type Configuration

The JSON file can contain data to configure a Data Point Type. It is possible to specify the following:

Data Point Type Configuration Data
Data	Use	Description
Description	Optional	List of values used as descriptions of the property. Each value must contain the following: Culture: culture of the text (for example, `“en-US”`). Text: description. The empty list (“Description”: [ ]) resets the description while the name of data point type is assumed as default description. NOTE: During the re-import, if the Override protection flag is set, the description cannot be modified.
ManagedType	Optional	A number representing the managed type of the element. For a complete list of Desigo CC managed types, see CC Managed Types.
DefaultProp	Optional	Property used as default for the object model. The empty string (“DefaultProp”: “”) resets the default property and in this case, the first property will be assumed as the default one. If the default property is part of a structure or a reference, the complete name must be specified (<name of structure>.<name of property> - for example: “Struct_Value.Int_Value”). If the default property is an element of a set, the name must be composed by the set name and the property index (<set name>[<index>] – for example: “SetChar_Value[1]”). Note that the index starts with “1”.
Validation	Optional	True if the validation must be enabled.
GenericCreate	Optional	True if the instances of this DPT can be created using the Object Configurator.
GenericDelete	Optional	True if the instances of this DPT can be deleted using the Object Configurator.
MaxChildren	Optional	Maximum allowed number of children of this type. The value `-1` or `UInt32.MaxValue` corresponds to no limit.
ChildName	Optional	Default name for the instances of this DPT. The empty string (“ChildName”: “”) erases the default name.
ChildNameReadOnly	Optional	True if the name of the instances is read-only.
ParentTypes	Optional	List of the parent types. The empty list (“ParentTypes”: [ ]) removes the configured parent nodes.
Classification	Optional	Object containing the data of the object model classification. For details, see Table Classification Data. The empty object (“Classification”: { }) resets the classification data.

Classification Data
Data	Use	Description
Valid	Optional	Validity flag. If false, the classification data is set but considered invalid.
Disc	Optional	Discipline number. The value `UInt32.MaxValue` resets the discipline value. NOTE: If Disc or SubDisc are missing (it is enough that only one of them is missing), discipline and subdiscipline are ignored.
SubDisc	Optional	Subdiscipline number. The value `UInt32.MaxValue` resets the subdiscipline value. NOTE: If Disc or SubDisc are missing (it is enough that only one of them is missing), discipline and subdiscipline are ignored.
Type	Optional	Type number. The value `UInt32.MaxValue` resets the type value. NOTE: If Type or SubType are missing (it is enough that only one of them is missing), type and subtype are ignored.
SubType	Optional	Subtype number. The value `UInt32.MaxValue` resets the subtype value. NOTE: If Type or SubType are missing (it is enough that only one of them is missing), type and sub-type are ignored.

Example:

{

"DPTData": {

"DPTS": [

{

Name": "*",

"DPES": [

{ "Name": "MyMandatoryFields", "Type": "REF", "Ref": "_GmsMyMandatoryFields" }

]

{

"Name": "Test_NormalPoint",

"Description":[{"Culture":"en-US", "Text":"Normal Point"}],

"ManagedType": 0,

"DefaultProp": "Float_Value",

"Validation": true,

"GenericCreate": true,

"GenericDelete": true,

"MaxChildren": 10,

"ChildName": "NormalPoint",

"ChildNameReadOnly": false,

"ParentTypes": ["GMS_Aggregator", "GmsOPCNetwork"],

"Classification": {

"Valid": true,

"Disc": 0,

"SubDisc": 0,

"Type": 0,

"SubType": 0

"DPES": [

{ "Name": "Char_Value", "PvssType": { "PvssType": "CHAR" } },

{ "Name": "UInt_Value", "PvssType": { "PvssType": "UINT" } },

{ "Name": "Enum_Value", "PvssType": { "PvssType": "UINT" } },

{ "Name": "Int_Value", "PvssType": { "PvssType": "INT" } },

{ "Name": "Float_Value", "PvssType": { "PvssType": "FLOAT" } },

{ "Name": "Bool_Value", "PvssType": { "PvssType": "BOOL" } },

{ "Name": "Bit32_Value", "PvssType": { "PvssType": "BIT" } },

{ "Name": "Duration_Value", "PvssType": { "PvssType": "UINT" } }

]

}

]

}

The following image shows the corresponding fields in the Models & Functions tab:

The following image shows the corresponding fields in the Object Configurator tab:

All the configuration data described here is ignored if the Name of the Data Point Type is an asterisk (“*”), because this name does not identify a Data Point Type but a set of mandatory Data Point Elements.

During the first import, if the previous configuration data is not present in the JSON file, the default values are assumed.

In the subsequent re-import, if one configuration data is not present in the file, the value is not changed.

Data Point Element Configuration

The JSON file can contain data to configure a Data Point Element. It is possible to specify the following:

Data Point Element Configuration Data
Data	Use	Description
Description	Optional	List of values used as descriptions of the WinCC OA object model. Each value must contain the following data: Culture: culture of the text (for example, `“en-US”`). Text: description The empty list (“Description”: [ ]) resets the description, while the name of the DPE is assumed as default description.
VL	Optional	True to enable logging properties in the Value Log (Event) of the History Database.
AL	Optional	True to enable logging properties in the Activity Log of the History Database.
DL0	Optional	True to enable Display Level 0 (properties will be visible in Engineering mode).
DL1	Optional	True to enable Display Level 1 (properties will be visible in the Status and Commands window available for graphic objects.).
DL2	Optional	True to enable Display Level 2 (properties will be visible in the Operation tab).
DL3	Optional	True to enable Display Level 3 (properties will be visible in the Extended Operation tab).
DL4	Optional	True to enable Display Level 4 (properties to be exposed to the OPC server interface and other northbound interfaces in future that will make use of this setting).
GroupId	Optional	String representing the property group. For details about the acceptable values, see Table Group ID Values. The empty string (“GroupId”: “”) sets the value as “Invalid”.
Persist	Optional	True if the value of the property must be persisted in the database any time its value changes.
Display		Object containing the display data for the data point element. For details, see Table Display Data. The empty object (“Display”: { }) resets the display data.
GmsType	Optional	An object representing the GMS type configuration data. This object must contain the GmsType element describing the GMS type of the property. For details about the acceptable values, see Table GMSType.
Commands	Optional	Commands associated to the current property. For details about the definition of a command, see Commands Configuration.
Alarms	Optional	Alarms associated to the current property. For details about the definition of a command, see Alarms Configuration.

It is also possible to extend the PvssType object of a data point element (see Table Data Point Element Data – PvssType) in order to specify:

The Normal Value of the property and its display status, adding the Status object (see Table Data Point Element Status).
The array attributes, only in case the PvssType specified is one of the supported arrays, adding the ArrayAttributes object (see Table Data Point Element ArrayAttributes).

Status Object

The Status object must contain the following:

Data Point Element Status
Data	Use	Description
Stat	Optional	True to enable the off-normal status. If the flag is false, the Normal Value is ignored.
DisplOffNormal	Optional	True to display off-normal values only.
NormalValue	Optional	Normal value of the DPE. The specified value must follow the specified PvssType. In particular: CHAR and ARRAYCHAR: integer (0 ÷ 255) UINT and ARRAYUINT: integer (0 ÷ 4294967295) INT and ARRAYINT: integer (-2147483648 ÷ 2147483647) FLOAT and ARRAYFLOAT: number (-1.797693e+308 ÷ 1.797693e+308) BOOL and ARRAYBOOL: Boolean (false or true) BIT and ARRAYBIT: integer (0 ÷ 4294967295) STRING and ARRAYSTRING: string STRING and ARRAYSTRING when GmsDataType (see Table GMSType) is GMSDATETIME: BACnetDateTime string format ('YYYMMDDWhhmmssHH' – for details, see the PvssMgr documentation). BIT64 and ARRAYBIT64: integer (0 - 18446744073709551615) LONG and ARRAYLONG: integer (-9223372036854775808 - 9223372036854775807) ULONG and ARRAYULONG: integer(0 - 18446744073709551615) For all the other PvssType, the Normal Value is not applicable, and it is ignored. In case of set types, the Normal Value can be specified for each element of the set.

ArrayAttributes Object

The ArrayAttributes object must contain the following:

Data Point Element ArrayAttributes
Data	Use	Description
Valid	Optional	Validity flag. If false, the display data is set but considered invalid.
TextGroup	Optional	The name of the text group. The empty string (“TextGroup”: “”) resets the text group.

Group ID Values
GroupId String	Description
INVALID	Invalid
STATUS	Status group
CONFIG	Configuration group
DIAGNOSTIC	Diagnostic group
OWNERSHIP	Ownership group

Display Data
Data	Use	Description
Valid	Optional	Validity flag. If false, the display data is set but considered invalid.
Icon	Optional	Object containing the data of the icon library and icon to be used to represent the property. For details, see Table Icon Data. The empty object (“Icon”: { }) resets the icon.

Icon Data
Data	Use	Description
Library	Optional	Name of the library that contains the icon to be used to represent the property. If the string is empty (“Library”: “”), the icon is ignored. NOTE: If the Library or the Name are empty (it is enough that only one of them is empty), the icon is ignored.
Name	Optional	Name of the icon to be used to represent the property. If the string is empty (“Name”: “”), the icon is ignored. NOTE 1: If the Library or the Name are empty (it is enough that only one of them is empty), the icon is ignored. NOTE 2: The icon name must contain the file extension (for example: “.png”, “.ico”, and so on). If the extension is not specified, “.png” is assumed.

It is also possible to specify the GmsType of the property. For details about the acceptable values, see Table GMSType.

Example:

{

"DPTData": {

"DPTS": [

{

"Name": "*",

"DPES": [

{ "Name": "MyMandatoryFields", "PvssType": { "PvssType": "REF", "Ref": "_GmsMyMandatoryFields" } }

]

{

"Name": "Test_NormalPoint",

"Description": [ { "Culture": "en-US", "Text": "Normal Point" } ],

"ManagedType": 0,

"DefaultProp": "Float_Value",

"Validation": true,

"GenericCreate": true,

"GenericDelete": true,

"MaxChildren": 10,

"ChildName": "NormalPoint",

"ChildNameReadOnly": false,

"ParentTypes": [ "GMS_Aggregator", "GmsOPCNetwork" ],

"Classification": {

"Disc": 0,

"SubDisc": 0,

"Type": 0,

"SubType": 0

"DPES": [

{

"Name": "Char_Value",

"PvssType": {

"PvssType": "CHAR",

"Status": {

"Stat": true,

"DisplOffNormal": true,

"NormalValue": 101

}

"VL": true,

"AL": true,

"DL0": true,

"DL1": true,

"DL2": false,

"DL3": false,

"Persist": true,

"GroupId": "CONFIG",

"Description": [ { "Culture": "en-US", "Text": "Char Value" } ],

"Display": {

"Valid": true,

"Icon": {

"Library": "Global_Base_HQ_1",

"Name": "Op_DP_Generic_None_001.png"

}

"GmsType": { "GmsType": "GMSUINT" }

{

"Name": "UInt_Value",

"PvssType": { "PvssType": "UINT" },

"VL": true,

"AL": true,

"DL0": false,

"DL1": false,

"DL2": true,

"DL3": true,

"Persist": true,

"GroupId": "CONFIG",

"Description": [ { "Culture": "en-US", "Text": "Unsigned Value" } ],

"Display": {

"Valid": true,

"Icon": {

"Library": "Global_Base_HQ_1",

"Name": "Op_DP_Generic_None_001.png"

}

{

"Name": "Enum_Value",

"PvssType": { "PvssType": "UINT" },

"VL": true,

"AL": true,

"Persist": true,

"GroupId": "CONFIG",

"Description": [ { "Culture": "en-US", "Text": "Enum Value" } ],

"Display": {

"Valid": true,

"Icon": {

"Library": "Global_Base_HQ_1",

"Name": "Op_DP_Generic_None_001.png"

}

{

"Name": "Int_Value",

"PvssType": { "PvssType": "INT" },

"VL": true,

"AL": true,

"Persist": true,

"GroupId": "CONFIG",

"Description": [ { "Culture": "en-US", "Text": "Integer Value" } ],

"Display": {

"Valid": true,

"Icon": {

"Library": "Global_Base_HQ_1",

"Name": "Op_DP_Generic_None_001.png"

}

{

"Name": "Float_Value",

"PvssType": { "PvssType": "FLOAT" },

"VL": true,

"AL": true,

"Persist": true,

"GroupId": "CONFIG",

"Description": [ { "Culture": "en-US", "Text": "Real Value" } ],

"Display": {

"Valid": true,

"Icon": {

"Library": "Global_Base_HQ_1",

"Name": "Op_DP_Generic_None_001.png"

}

{

"Name": "Bool_Value",

"PvssType": { "PvssType": "BOOL" },

"VL": true,

"AL": true,

"Persist": true,

"GroupId": "CONFIG",

"Description": [ { "Culture": "en-US", "Text": "Bool Value" } ],

"Display": {

"Valid": true,

"Icon": {

"Library": "Global_Base_HQ_1",

"Name": "Op_DP_Generic_None_001.png"

}

{

"Name": "Bit32_Value",

"PvssType": { "PvssType": "BIT" },

"VL": true,

"AL": true,

"Persist": true,

"GroupId": "CONFIG",

"Description": [ { "Culture": "en-US", "Text": "BitString Value" } ],

"Display": {

"Valid": true,

"Icon": {

"Library": "Global_Base_HQ_1",

"Name": "Op_DP_Generic_None_001.png"

}

{

"Name": "Duration_Value",

"PvssType": { "PvssType": "UINT" },

"VL": true,

"AL": true,

"Persist": true,

"GroupId": "CONFIG",

"Description": [ { "Culture": "en-US", "Text": "Duration Value" } ],

"Display": {

"Valid": true,

"Icon": {

"Library": "Global_Base_HQ_1",

"Name": "Op_DP_Generic_None_001.png"

}

]

{

"Name": "Test_PointWithArray",

"Description": [ { "Culture": "en-US", "Text": "Point with Array" } ],

"ManagedType": 0,

"DefaultProp": "ArrChar_Value",

"Validation": true,

"GenericCreate": true,

"GenericDelete": true,

"MaxChildren": 4294967295,

"ChildName": "PointWithArray",

"ChildNameReadOnly": false,

"ParentTypes": [ "GMS_Aggregator" ],

"Classification":

{

"Valid": true,

"Disc": 0,

"SubDisc": 0,

"Type": 0,

"SubType": 0

"DPES": [

{ "Name": "ArrChar_Value", "PvssType": { "PvssType": "ARRAYCHAR" } },

{

"Name": "ArrUInt_Value",

"PvssType": {

"PvssType": "ARRAYUINT",

"Status": {

"Stat": true,

"DisplOffNormal": true,

"NormalValue": 100

"ArrayAttributes": {

"Valid" : true,

"TextGroup" : "TxG_Status"

}

{ "Name": "ArrInt_Value", "PvssType": { "PvssType": "ARRAYINT" } },

{ "Name": "ArrFloat_Value", "PvssType": { "PvssType": "ARRAYFLOAT" } }

]

}

]

}

GMSType

It is also possible to specify the GmsType of the property. For details about the acceptable values, see the following table.

GMSType Values
GmsType String	Description
GMSBOOL	GmsBool type
GMSINT	GmsInt type
GMSUINT	GmsUint type
GMSREAL	GmsReal type
GMSENUM	GmsEnum type
GMSBITSTRING	GmsBitString type
GMSDATETIME	GmsDateTime type
GMSDURATION	GmsDuration type
GMSBITSTRING64	GmsBitString64 type
GMSINT64	GmsInt64 type
GMSUINT64	GmsUint64 type
GMSNONE	No GMS type is set.

NOTICE

Unsupported Types

The types GmsAny and GmsApplSpecific are not supported.

The following image shows the corresponding fields in the Models & Functions tab:

According to the GmsType, it is possible to configure specific data. For details, see the following sections.

During the first import, if the previous configuration data is not present in the JSON file, the default values are assumed. In the subsequent re-import, if a configuration data is not present in the file, the value is not changed. This is valid also for the specific data related to the different GmsTypes.

GmsBool Configuration

GmsBool Configuration Data
Data	Use	Description
GmsType	Mandatory	GMSBOOL
Attributes	Optional	Object containing the attributes of the property. For details, see Table GmsBool Attributes. The empty object (“Attributes”: { }) resets the attributes data.

GmsBool Attributes
Data	Use	Description
Valid	Optional	Validity flag. If false, the display data is set but is considered invalid.
TextGroup	Optional	The name of the text group to be used for the texts corresponding to the values 0 (false) and 1 (true). The empty string (“gTextGroup”: “”) reset the text group.

Example:

{

"Name": "Bool_Value",

"PvssType": { "PvssType": "BOOL" },

"VL": true,

"AL": true,

"Persist": true,

"GroupId": "CONFIG",

"Description": [ { "Culture": "en-US", "Text": "Bool Value" } ],

"Display": {

"Valid": true,

"Icon": {

"Library": "Global_Base_HQ_1",

"Name": "Op_DP_Generic_None_001.png"

}

"GmsType": {

"GmsType": "GMSBOOL",

"Attributes": {

"Valid": true,

"TextGroup": "TxG_NoYes"

}

The following image shows the corresponding fields in the Models & Functions tab:

GmsInt Configuration

GmsInt Type Configuration Data
Data	Use	Description
GmsType	Mandatory	GMSINT
Attributes	Attributes	Object containing the attributes of the property. For details, see Table GmsInt Attributes. The empty object (“Attributes”: { }) resets the attributes data.

GmsInt Attributes
Data	Use	Description
Valid	Optional	Validity flag. If false, the display data is set but considered invalid.
Properties	Optional	Object containing the valid range values. For details, see Table GmsInt Properties. If the object is empty (“Properties”: { }), the range values are reset, and the range is `Int32.MinValue ÷ Int32.MaxValue` or -128 ÷ 127 according to the PvssType.
UnitText	Optional	Object containing the engineering unit data. For details, see Table Engineering Unit. If the object is empty (“UnitText”: { }), the engineering unit is reset.

GmsInt Properties
Data	Use	Description
Min	Optional	Min value.
Max	Optional	Max value.

Since the GmsInt can be based either on PvssInt or PvssChar, the values Min and Max must respect the following limits:

In case of PvssInt: -2147483648 ÷ 2147483647
In case of PvssChar: -128 ÷ 127

Engineering Unit
Data	Use	Description
TextGroup	Optional	Unit Text Group containing the specified engineering unit. NOTE: If the TextGroup string or Unit string are empty (it is enough that only one of them is empty), the engineering unit is ignored.
Unit	Optional	String representing the engineering unit. This string must be written according to Desigo CC default language (en-US). NOTE: If the TextGroup string or Unit string are empty (it is enough that only one of them is empty), the engineering unit is ignored.

Example:

{

"Name": "Int_Value",

"PvssType": { "PvssType": "INT" },

"VL": true,

"AL": true,

"Persist": true,

"GroupId": "CONFIG",

"Description": [ { "Culture": "en-US", "Text": "Integer Value" } ],

"Display": {

"Valid": true,

"Icon": {

"Library": "Global_Base_HQ_1",

"Name": "Op_DP_Generic_None_001.png"

}

"GmsType": {

"GmsType": "GMSINT",

"Attributes”: {

"Valid": true,

"UnitText": {

"Unit": "°C",

"TextGroup": "TxG_EngineeringUnits"

"Properties”: {

"Min": -40,

"Max": 70

}

The following image shows the corresponding fields in the Models & Functions tab:

GmsUint Configuration

GmsUint Type Configuration Data
Data	Use	Description
GmsType	Mandatory	GMSUINT
Attributes	Optional	Object containing the attributes of the property. For details, see Table GmsUint Attributes. The empty object (“Attributes”: { }) resets the attributes data.

GmsUint Attributes
Data	Use	Description
Valid	Optional	Validity flag. If false, the display data is set but considered invalid.
Properties	Optional	Object containing the valid range values. For details, see Table GmsUint Properties. If the object is empty (“Properties”: { }), the range values are reset, and the range is `UInt32.MinValue ÷ UInt32.MaxValue` or 0 ÷ 255 according to the PvssType.
UnitText	Optional	Object containing the engineering unit data. For details, see Table Engineering Unit. If the object is empty (“UnitText”: { }), the engineering unit is reset.

GmsUint Properties
Data	Use	Description
Min	Optional	Min value.
Max	Optional	Max value.

Since the GmsUint can be based either on PvssUint or PvssChar, the values Min and Max must respect the following limits:

In case of PvssUInt: 0 ÷ 4294967295
In case of PvssChar: 0 ÷ 255

Example:

{

"Name": "UInt_Value",

"PvssType": { "PvssType": "UINT" },

"VL": true,

"AL": true,

"Persist": true,

"GroupId": "CONFIG",

"Description": [ { "Culture": "en-US", "Text": "Unsigned Value" } ],

"Display": {

"Valid": true,

"Icon": {

"Library": "Global_Base_HQ_1",

"Name": "Op_DP_Generic_None_001.png"

}

"GmsType": {

"GmsType": "GMSUINT",

"Attributes”: {

"Valid”: true,

"Properties”: {

"Min": 0,

"Max": 100

"UnitText": {

"Unit": "%",

"TextGroup": "TxG_EngineeringUnits"

}

The following image shows the corresponding fields in the Models & Functions tab:

GmsReal Configuration

GmsReal Configuration Data
Data	Use	Description
GmsType	Optional	GMSREAL
Attributes	Optional	Object containing the attributes of the property. For details, see the table GmsReal Attributes. The empty object (“Attributes”: { }) resets the attributes data.

GmsReal Attributes
Data	Use	Description
Valid	Optional	Validity flag. If false, the display data is set but considered invalid.
Properties	Optional	Object containing the valid range values and the resolution. For details, see Table GmsReal Properties. If the object is empty (“Properties”: { }), the values are reset: the range is `double.MinValue ÷ double.MaxValue`, while the resolution is 0.
UnitText	Optional	Object containing the engineering unit data. For details, see Table Engineering Unit. If the object is empty (“UnitText”: { }), the engineering unit is reset.

GmsReal Properties
Data	Use	Description
Min	Optional	Min value. The value must be expressed according to the CultureInfo.InvariantCulture.
Max	Optional	Max value. The value must be expressed according to the CultureInfo.InvariantCulture.
Res	Optional	Resolution. The max value for the resolution is 16.

Example:

{

"Name": "Float_Value",

"PvssType": { "PvssType": "FLOAT" },

"VL": true,

"AL": true,

"Persist": true,

"GroupId": "CONFIG",

"Description": [ { "Culture": "en-US", "Text": "Real Value" } ],

"Display": {

"Valid": true,

"Icon": {

"Library": "Global_Base_HQ_1",

"Name": "Op_DP_Generic_None_001.png"

}

"GmsType": {

"GmsType": "GMSREAL",

"Attributes”: {

"Valid”: true,

"UnitText": {

"Unit": "KWh",

"TextGroup": "TxG_EngineeringUnits"

"Properties": {

"Min": 0.00,

"Max": 100.00,

"Res": 2

}

The following image shows the corresponding fields in the Models & Functions tab:

GmsEnum Configuration

GmsEnum Configuration Data
Data	Use	Description
GmsType	Mandatory	GMSENUM
Attributes	Optional	Object containing the attributes of the property. For details, see Table GmsEnum Attributes. The empty object (“Attributes”: { }) resets the attributes data.

GmsEnum Attributes
Data	Use	Description
Valid	Optional	Validity flag. If false, the display data is set but considered invalid.
Properties	Optional	Object containing the valid range values. For details, see Table GmsEnum Properties. If the object is empty (“Properties”: { }), the range values are reset, while the range is `UInt32.MinValue ÷ UInt32.MaxValue`.
TextGroup	Optional	Name of the text group to be used for the texts corresponding to the enumerative. If the string is empty (“TextGroup”: “”), the value is reset.

GmsEnum Properties
Data	Use	Description
Min	Optional	Min value.
Max	Optional	Max value.

Example:

{

"Name": "Enum_Value",

"PvssType": { "PvssType": "UINT" },

"VL": true,

"AL": true,

"Persist": true,

"GroupId": "CONFIG",

"Description":[{"Culture":"en-US", "Text":"Enum Value"}],

"Display": {

"Valid": true,

"Icon": {

"Library": "Global_Base_HQ_1",

"Name": "Op_DP_Generic_None_001.png"

}

"GmsType": {

"GmsType": "GMSENUM",

"Attributes": {

"Valid": true,

"Properties": {

"Min": 0,

"Max": 8

"TextGroup": "TxG_Status"

}

The following image shows the corresponding fields in the Models & Functions tab:

GmsBitString Configuration

GmsBitString Configuration Data
Data	Use	Description
GmsType	Mandatory	GMSBITSTRING
Attributes	Optional	Object containing the attributes of the property. For details, see Table GmsBitString Attributes. The empty object (“Attributes”: { }) resets the attributes data.

GmsBitString Attributes
Data	Use	Description
Valid	Optional	Validity flag. If false, the display data is set but considered invalid.
Properties	Optional	Object containing the valid range values. For details, see Table GmsBitString Properties. If the object is empty (“Properties”: { }), the range values are reset.
TextGroup	Optional	Name of the text group to be used. If the string is empty (“TextGroup”: “”), the value is reset.
SecondTextGroup	Optional	Name of the secondary text group to be used. If the string is empty (“SecondaryTextGroup”: “”), the value is reset.

GmsBitString Attributes
Data	Use	Description
FirstBit	Optional	Index of the first bit to be used (from 0 to 31).
LastBit	Optional	Index of the last bit to be used (from 0 to 31).

Example:

{

"Name": "Bit32_Value",

"PvssType": { "PvssType": "BIT" },

"VL": true,

"AL": true,

"Persist": true,

"GroupId": "CONFIG",

"Description": [ { "Culture": "en-US", "Text": "BitString Value" } ],

"Display": {

"Valid": true,

"Icon": {

"Library": "Global_Base_HQ_1",

"Name": "Op_DP_Generic_None_001.png"

}

"GmsType": {

"GmsType": "GMSBITSTRING",

"Attributes":

{

"Valid": true,

"Properties": {

"FirstBit": 0,

"LastBit": 2

"TextGroup": "TxG_LoadLevels",

"SecondTextGroup": "TxG_OperationalStatus"

}

The following image shows the corresponding fields in the Models & Functions tab:

GmsDateTime Configuration

GmsDateTime Configuration Data
Data	Use	Description
GmsType	Mandatory	GMSDATETIME
Attributes	Optional	Object containing the attributes of the property. For details, see Table GmsDateTime Attributes. The empty object (“Attributes”: { }) resets the attributes data.

GmsDateTime Attributes
Data	Use	Description
Valid	Optional	Validity flag. If false, the display data is set but considered invalid.
Properties	Optional	Object containing the valid properties. For details, see Table GmsDateTime Properties. If the object is empty (“Properties”: { }), the values are set to false.
TimeDetail	Optional	String representing the time detail. For details about the acceptable values, see Table TimeDetail Values. If the string is empty (“TimeDetail”: “”), the value is set to `BACnetDateTime.eDetail.DateTimeValid`.
TimeRes	Optional	String representing the time resolution. For details about the acceptable values, see Table TimeRes Values. If the string is empty (“TimeRes”: “”), the value is set to `PropertyGmsDateTime.eResolution.Seconds`.

GmsDateTime Properties
Data	Use	Description
AllowDayOfWeek	Optional	True to allow the day of the week representation.
AllowWildcards	Optional	True to allow the use of wildcards.

TimeDetail Values
Data	Description
NONE	Nothing valid.
DATE	Property that contains a value representing a date.
TIME	Property that contains a value representing a time.
DATETIME	Property that contains a value representing a date and a time.

TimeRes Values
Data	Description
SEC	Property that contains a time value with a resolution for the seconds display.
10TH	Property that contains a time value with a resolution of the 10th seconds.
100TH	Property that contains a time value with a resolution of the 100th seconds.

Example:

{

"Name": "String_Value",

"PvssType": { "PvssType": "STRING" },

"VL": true,

"AL": true,

"Persist": true,

"GroupId": "CONFIG",

"Description": [ { "Culture": "en-US", "Text": "DateTime Value" } ],

"Display": {

"Valid": true,

"Icon": {

"Library": "Global_Base_HQ_1",

"Name": "Op_DP_Generic_None_001.png"

}

"GmsType": {

"GmsType": "GMSDATETIME",

"Attributes": {

"Valid": true,

"Properties": {

"AllowDayOfWeek": true,

"AllowWildcards": true

"TimeDetail": "DATETIME",

"TimeRes": "SEC"

}

The following image shows the corresponding fields in the Models & Functions tab:

GmsDuration Configuration

GmsDuration Configuration Data
Data	Use	Description
GmsType	Mandatory	GMSDURATION
Attributes	Optional	Object containing the attributes of the property. For details, see Table GmsDuration Attributes. The empty object (“Attributes”: { }) resets the attributes data.

GmsDuration Attributes
Data	Use	Description
Valid	Optional	Validity flag. If false, the display data is set but considered invalid.
Properties	Optional	Object containing the valid range values. For details, see Table GmsDuration Properties. If the object is empty (“Attributes”: { }), the range values are reset, while the range is `UInt32.MinValue ÷ UInt32.MaxValue`.
DurationUnit	Optional	String representing the measurement unit of the property value. For details about the acceptable values, see Table DurationUnit Values. If the string is empty (“DurationUnit”: “”), the value is set to `PropertyGmsDuration.eUnit.Sec`.
DurationRes	Optional	String representing the resolution of the property value. For details about the acceptable values, see Table DurationRes Values. If the string is empty (“DurationRes”: “”), the value is set to `PropertyGmsDuration.eResolution.Sec`.

GmsDuration Properties
Data	Use	Description
Min	Optional	Min value.
Max	Optional	Max value.

DurationUnit Values
Data	Description
DAY	Day
HOUR	Hour
MIN	Min
SEC	Sec
DSEC	Decimal Sec
CSEC	Centi Sec
MSEC	Milli Sec

DurationRes Values
Data	Description
D	Day
DH	Day-Hour
DHM	Day-Hour-Min
DHMS	Day-Hour-Min-Sec
DHMSM	Day-Hour-Min-Sec-Ms
H	Hour
HM	Hour-Min
HMS	Hour-Min-Sec
HMSM	Hour-Min-Sec-Ms
M	Min
MS	Min-Sec
MSM	Min-Sec-Ms
S	Sec
SM	Sec-Ms

Example:

{

"Name": "Duration_Value",

"PvssType": { "PvssType": "UINT" },

"VL": true,

"AL": true,

"Persist": true,

"GroupId": "CONFIG",

"Description":[{"Culture":"en-US", "Text":"Duration Value"}],

"Display": {

"Valid": true,

"Icon": {

"Library": "Global_Base_HQ_1",

"Name": "Op_DP_Generic_None_001.png"

}

"GmsType": {

"GmsType": "GMSDURATION",

"Attributes”: {

"Valid": true,

"Properties”: {

"Min": 0,

"Max": 10000

"DurationUnit": "MSEC",

"DurationRes": "SM"

}

The following image shows the corresponding fields in the Models & Functions tab:

GmsBitString64 Configuration

GmsBitString64 Configuration Data
Data	Use	Description
GmsType	Mandatory	GMSBITSTRING64
Attributes	Optional	Object containing the attributes of the property. For more details, see Table GmsBitString64 Attributes. The empty object (“Attributes”: { }) resets the attributes data.

GmsBitString64 Attributes
Data	Use	Description
Valid	Optional	Validity flag. If false, the display data is set but considered invalid.
Properties	Optional	Object containing the valid range values. For more details, see Table GmsBitString64 Properties. If the object is empty (“Properties”: { }), the range values are reset.
TextGroup	Optional	Name of the text group to be used. If the string is empty (“TextGroup”: “”), the value is reset.

GmsBitString64 Properties
Data	Use	Description
FirstBit	Optional	Index of the first bit to be used (from 0 to 63).
LastBit	Optional	Index of the last bit to be used (from 0 to 63).

Example:

"Name": "Bit64_Value",

"PvssType": {

"PvssType": "BIT64",

"Status": {

"Stat": true,

"DisplOffNormal": true,

"NormalValue": 9

}

"VL": true,

"AL": true,

"Persist": true,

"GroupId": "CONFIG",

"Description": [ { "Culture": "en-US", "Text": "Bit64 Value" } ],

"Display": {

"Valid": true,

"Icon": {

"Library": "Global_Base_HQ_1",

"Name": "Op_DP_Generic_None_001.png"

}

"GmsType": {

"GmsType": "GMSBITSTRING64",

"Attributes": {

"Valid": true,

"Properties" : {

"FirstBit": 0,

"LastBit": 63

"TextGroup": "TxG_AlertState"

}

The following image shows the corresponding fields in the Models & Functions tab:

GmsInt64 Configuration

GmsInt64 Type Configuration Data
Data	Use	Description
GmsType	Mandatory	GMSINT64
Attributes	Optional	Object containing the attributes of the property. For more details, see Table GmsInt64 Attributes. The empty object (“Attributes”: { }) resets the attributes data.

GmsInt64 Attributes
Data	Use	Description
Valid	Optional	Validity flag. If false, the display data is set but considered invalid.
Properties	Optional	Object containing the valid range values. For more details see Table GmsInt64 Properties. If the object is empty (“Properties”: { }), the range values are reset, and the range is `Int64.MinValue ÷ Int64.MaxValue`.
UnitText	Optional	Object containing the engineering unit data. For more details see, Table Engineering Unit. If the object is empty (“UnitText”: { }), the engineering unit is reset.

GmsInt64 Properties
Data	Use	Description
Min	Optional	Min value
Max	Optional	Max value

NOTICE

The values Min and Max must respect the following limits: -9223372036854775808 ÷ 9223372036854775807.

Example:

{

"Name": "Long_Value",

"PvssType": {

"PvssType": "LONG",

"Status": {

"Stat": true,

"DisplOffNormal": true,

"NormalValue": -99

}

"VL": true,

"AL": true,

"DL0": true,

"DL1": true,

"DL2": true,

"DL3": true,

"Persist": true,

"GroupId": "CONFIG",

"Description": [ { "Culture": "en-US", "Text": "Long Value" } ],

"Display": {

"Valid": true,

"Icon": {

"Name": "Op_DP_Generic_None_001.png"

}

"GmsType": {

"GmsType": "GMSINT64",

"Attributes": {

"Valid": true,

"UnitText": {

"TextGroup": "MyText",

"Unit": "§"

"Properties":{

"Min": -40000,

"Max": 40000

}

The following image shows the corresponding fields in the Models & Functions tab:

GmsUint64 Configuration

GmsUint64 Type Configuration Data
Data	Use	Description
GmsType	Mandatory	GMSUINT
Attributes	Optional	Object containing the attributes of the property. For more details, see Table GmsUint64 Attributes. The empty object (“Attributes”: { }) resets the attributes data.

GmsUint64 Attributes
Data	Use	Description
Valid	Optional	Validity flag. If false, the display data is set but considered invalid.
Properties	Optional	Object containing the valid range values. For more details see Table GmsUint64 Properties. If the object is empty (“Properties”: { }), the range values are reset, and the range is `UInt64.MinValue ÷ UInt64.MaxValue`.
UnitText	Optional	Object containing the engineering unit data. For more details see, Table Engineering Unit. If the object is empty (“UnitText”: { }), the engineering unit is reset.

GmsUint64 Properties
Data	Use	Description
Min	Optional	Min value
Max	Optional	Max value

NOTICE

The values Min and Max must respect the following limits: 0 ÷ 18446744073709551615.

Example:

{

"Name": "ULong_Value",

"PvssType": {

"PvssType": "ULONG",

"Status": {

"Stat": true,

"DisplOffNormal": true,

"NormalValue": 66

}

"VL": true,

"AL": true,

"DL0": true,

"DL1": true,

"DL2": true,

"DL3": true,

"Persist": true,

"GroupId": "CONFIG",

"Description": [ { "Culture": "en-US", "Text": "Unsigned Long Value" } ],

"GmsType": {

"GmsType": "GMSUINT64",

"Attributes": {

"Valid": true,

"Properties":{

"Min": 0,

"Max": 100000

"UnitText": {

"TextGroup": "MyText",

"Unit": "°"

}

The following image shows the corresponding fields in the Models & Functions tab:

GmsNone Configuration

GmsNone Configuration Data
Data	Use	Description
GmsType	Mandatory	GMSNONE

The GMSNONE type is a special type used during the re-import of an object model in case it is necessary to remove the configuration of the GmsType previously made and restore the original PvssType.

The GMSNONE type is ignored in case an object model is created for the first time.

The following example shows how to use GMSNONE for configuring a data point previously configured as a GmsBool. After the re-import, the type of the “Bool_Value” is “PvssBool”.

{

"Name": "Bool_Value",

"PvssType": { "PvssType": "BOOL" },

"VL": true,

"AL": true,

"Persist": true,

"GroupId": "CONFIG",

"Description": [ { "Culture": "en-US", "Text": "Bool Value" } ],

"Display": {

"Valid": true,

"Icon": {

"Library": "Global_Base_HQ_1",

"Name": "Op_DP_Generic_None_001.png"

}

"GmsType": {

"GmsType": "GMSNONE"

}

References Configuration

If a Data Point Element is of reference type, the resulting Data Point Type will contain all the properties (DPEs) of the referenced type.

In this case, it is not necessary that the JSON file contains the definition of the referenced type. Anyway, it can be necessary to configure some of these properties (DPEs).

To configure the properties of the referenced Data Point Types, the JSON file must contain an element (property) named REFS with an element named DPTS that is a list of the referenced Data Point Types with the configuration of their properties.

Example:

{

"DPTData": {

"DPTS": [ ...<list of DPTs description>...]

"REFS": {

"DPTS": [ ...<list of Referenced DPTs configuration>...]

}

For each referenced Data Point Type, it is necessary to specify the following:

Referenced Data Point Type Data
Data	Use	Description
Name	Mandatory	Name of the referenced Data Point Type.
DPES	Mandatory	List of Data Point Elements. Only the properties that must be configured are defined in the file.

Example:

{

"DPTData": {

"DPTS": [ ...<list of DPTs description>...]

"REFS": {

"DPTS": [

{ "Name": "_GmsMyMandatoryFields",

"DPES": [

{ "Name": "MandatoryText", "PvssType": { "PvssType": "STRING"},

"VL": true, "AL": true,

"Persist": true, "GroupId": "CONFIG",

"Description":[{"Culture":"en-US", "Text":"Mandatory Text"}],

"Display": {

"Valid": true,

"Icon": {

"Library": "Global_Base_HQ_1",

"Name": "Op_DP_Generic_None_001.png"

}

]

}

]

}

The configuration of the Data Point Elements is the same as described in section Data Point Element.

The configuration of a referenced Data Point Type is applied to all the Data Point Types (defined in the JSON file) that reference the referenced Data Point Type.

As the references to _GmsRelatedItems and _GmsStatusPropagation are automatically added during the import if not present in the JSON file, it is not necessary to configure them in the JSON file. Those referenced DPTs contain internal properties that do not require any configuration. Only the property AggregatedSummaryStatus will be automatically configured during the import. If it is necessary to set different values for the property AggregatedSummaryStatus, the reference _GmsStatusPropagation must be added into the Data Point Type definition in the JSON file, and the configuration of the property must be added to the REFS element.

Text Groups Configuration

The JSON file can also contain the text groups definition. In this case, the text groups will be created before the object models are created and configured.

To define the text groups and their elements, the JSON file must contain an element (property) named TGSData with an element named TGS that is a list of the text groups.

Example:

{

"DPTData": {

"DPTS": [ ...<list of DPTs description>... ]

"REFS": {

"DPTS": [ ...<list of Referenced DPTs configuration>... ]

"TGSData": {

"TGS": [...<list of text groups configuration>... ]

}

For each text group, it is necessary to specify the following:

Text Group Data
Data	Use	Description
Name	Mandatory	Name of the text group.
Description	Optional	List of the values used as CNS descriptions of the text group. Each value must contain the following data: Culture: culture of the text (for example, “en-US”). Text: description. The empty list (“Description”: [ ]) resets the description, while the name of the text group is assumed as default description.
TGElems	Mandatory	List of texts.

Each text must contain the following:

Text Data
Data	Use	Description
Id	Mandatory	Text identifier.
Text	Mandatory	List of text values. Each value must contain the following data: Culture: culture of the text (for example, “en-US”). Text: text string.

In case of a re-import, the text groups and the text values are not deleted. It is only possible to add new text values or change the previously imported ones.

Example:

{

"DPTData": {

"DPTS": [ ...<list of DPTs description>... ]

"REFS": {

"DPTS": [ ...<list of Referenced DPTs configuration>... ]

"TGSData": {

"TGS": [

{ "Name": "MyText",

"Description": [ { "Culture": "en-US", "Text": "My Text Group"} ],

"TGElems":[

{ "Id": 1,

"Text": [

{ "Culture": "en-US", "Text": "Text 1" },

{ "Culture": "it-IT", "Text": "Testo 1" }

]

{ "Id": 2,

"Text": [

{ "Culture": "en-US", "Text": "Text 2" },

{ "Culture": "it-IT", "Text": "Testo 2" }

]

{ "Id": 3,

"Text": [

{ "Culture": "en-US", "Text": "Text 3" },

{ "Culture": "it-IT", "Text": "Testo 3" }

]

}

]

}

]

}

The following image shows the corresponding fields in the Text Group Editor tab:

The command macro text group (TxG_CommandMacro) is currently not managed. Consequently, if a JSON file contains this text group, it is ignored during the import process.

Commands Configuration

The JSON file can also contain the commands configuration. In this case, the commands must exist already in the project. Note that the commands must be created using the Test Client application (Siemens.Pvss.PvssMgr_TestClient.exe) before the import is done.

The commands definition is a part of the DPE configuration (see Data Point Element Configuration).

NOTICE

In case of re-import:
- All the commands defined for a DPE must be specified.
- The mandatory commands of the SuppressAlarms DPE are ignored. In case these commands are manually modified or deleted, it is not possible to repair them by re-importing the object model.

To configure the commands, it is possible to specify the following properties:

Commands Properties
Property	Use	Description
Dependency1	Optional	Name of a property that can be used to define a condition in the commands. If the dependency property is part of a structure or a reference, the complete name must be specified (<name of structure>.<name of property> - for example: “Struct_Value.Int_Value”). If the dependency property is an element of a set, then the name must be composed by the set name and the property index (<set name>[<index>] – for example: “SetChar_Value[1]”). Note that the index starts with “1”. Up to three dependency properties can be defined. Additionally, a property can be specified more than once. The dependency property must be defined starting from the first one. This means that it is not possible to specify the Dependency2 property if the Dependency1 is empty. Only the properties of some types are allowed as dependencies. Specifically, see the following allowed types: `eGmsDataType.PvssBool` `eGmsDataType.PvssFloat` `eGmsDataType.PvssInt` `eGmsDataType.PvssInt64` `eGmsDataType.PvssUint` `eGmsDataType.PvssUint64` `eGmsDataType.GmsBitString` `eGmsDataType.GmsBitString64` `eGmsDataType.GmsBool` `eGmsDataType.GmsEnum` `eGmsDataType.GmsInt` `eGmsDataType.GmsInt64` `eGmsDataType.GmsReal` `eGmsDataType.GmsUint` `eGmsDataType.GmsUint64` `eGmsDataType.GmsDuration`
Dependency2	Optional	See Dependency1.
Dependency3	Optional	See Dependency1.
CommandsData	Optional	List of commands. For the mandatory property SuppressAlarms, the commands are configured automatically by the importer. These standard commands cannot be removed or changed. For details about the definition of a command, see Table Commands Data. In case of re-import, all the required commands must be specified. Any other commands already existing but not specified in the file will be removed. The mandatory commands of the SuppressAlarms are ignored during the re-import. For details related to re-importing commands, see Guid in Table Commands Data.

For each command, it is necessary to specify the following data:

Command Data
Data	Use	Description
CommandType	Mandatory	Name of the command type for the selected property (for example, BACnetAnalogWithPriority). NOTE: The command type must exist in the project.
Name	Mandatory	Name of the command. NOTE: This name must be unique for the current property (for example, WritePrio08, ReleasePrio08).
Label	Optional	List of values used as descriptions of the command (for example, descriptive text for the button in the Status and Commands window). Each value must contain the following data: Culture: culture of the text (for example, “en-US”). Text: label If the list is empty (“Label”: [ ]), the command name is assumed as default label.
Guid	Optional	A string that identifies the command. NOTES: The value of this string is automatically assigned by the system when the command is created for the first time. The value must not be set manually. When an object model is imported for the first time, all the commands specified for its properties do not have the Guid or the Guid must be declared but empty (“Guid”: “”). In this case, the importer creates a new command. If an object model is exported, the Guid contains the value automatically assigned by the system. This value must not be changed, otherwise the command can no longer be recognized in case of re-import. In case of re-import: If the Guid is not specified or it is empty (“Guid”: “”), the command is created or re-created. If the Guid is specified and matches the one of an existing command, the existing command is updated. If the Guid is specified and it does not match the one of an existing command, the command is ignored. All the commands already existing but not updated, using the matching Guid mechanism, are removed. If it is necessary to remove a command previously created, the command must be removed from the command list.
Dependencies	Optional	List of dependencies. For details about the definition of a dependency (that is, a condition based on a property specified in one of the Dependency<X> fields), see Table Dependency Data.
Alias	Optional	Alias identifier. The value 0 is the default one (corresponding to “n/a”). NOTES: The alias must be unique for all the properties of an object model. The identifier that must be specified is the value of the corresponding alias in the Command Macro text group (TxG_CommandMacro). The identifier must be present in the text group before the import is carried out. The Command Macro text group is not managed by this importer. If it is added in the JSON file, this text group is ignored.
Group	Optional	String that defines the Command Groups configuration in the Scope Rights expander of the security definition used to execute the command. Possible settings are: Standard (Sta.) Event (Eve.) Advanced (Adv.) Ownership (Own.) If not specified, the Standard setting is taken by default.
Control	Optional	Type of control that must be used in the user interface. Possible settings are: Default Expander If not specified, the Default setting is taken.
Combined	Optional	True, if a command can be selected from a drop-down list in case of multiple commands. The default value is False.
Display	Optional	String that defines where the command is used. Possible settings are: SOFTWARE GENERIC_DISPLAY GENERIC_DISPLAY_SOFTWARE RESERVED If not specified, the GENERIC_DISPLAY_SOFTWARE setting is taken by default.
TargetedProperty	Optional	Name of the target property affected by this command. If not specified, the current property is taken by default. If the string is empty (“TargetedProperty”: “”), the current property is taken. If the targeted property is part of a structure or a reference, the complete name must be specified (<name of structure>.<name of property> - for example: “Struct_Value.Int_Value”). If the target property is an element of a set, the name must be composed by the set name and the property index (<set name>[<index>] – for example: “SetChar_Value[1]”). Note that the index starts with “1”.
Logging	Optional	String that defines when values are written into the History Database. Possible settings are: ALWAYS NEVER ON_FAILURE If not specified, the ALWAYS value is taken by default.
Parameters	Optional	List of parameters. For details about the definition of a parameter, see Table Parameter Data. In case of re-import, all the required parameters must be specified. In fact, the list of parameters is re-created at each import.

Each dependency must include the following data:

Dependency Data
Data	Use	Description
Property	Mandatory	Name of the dependency property that must be evaluated in the command condition. NOTE: The name to specify must be one of the properties configured in the Dependency<X> fields.
Operation	Optional	String representing the operation that must be evaluated. For the list of possible values, see Table Operation Values. If not specified, the “*” value (n/a) is taken by default.
Value1	Optional	The value to be evaluated in the condition. If the operation is specified and it is different from “”, at least the Value1 must be provided. NOTE:* The value must be expressed according to the CultureInfo.InvariantCulture.
Value2	Optional	The additional value to be evaluated in the condition. NOTE: The value must be expressed according to the CultureInfo.InvariantCulture.

Operation Values
Operation String	Description	Property Types
*	n/a	All types
=	Equal	All types
<>	Not equal	`eGmsDataType.PvssBool` `eGmsDataType.GmsBool` `eGmsDataType.GmsEnum` `eGmsDataType.PvssUint` `eGmsDataType.PvssUint64` `eGmsDataType.PvssInt` `eGmsDataType.PvssInt64` `eGmsDataType.PvssFloat` `eGmsDataType.GmsInt` `eGmsDataType.GmsInt64` `eGmsDataType.GmsUint` `eGmsDataType.GmsUint64` `eGmsDataType.GmsReal` `eGmsDataType.GmsDuration`
<	Less exclusive
<=	Less inclusive
>	Greater exclusive
>=	Greater inclusive
IN	In (bit set)	`eGmsDataType.GmsBitString` `eGmsDataType.GmsBitString64`

Each parameter must contain the following data:

Parameter Data
Data	Use	Description
Name	Mandatory	Name of the parameter.
Label	Optional	List of values used as descriptions of the parameter. Each value must contain the following data: Culture: culture of the text (for example, “en-US”) Text: label
DefaultValue	Optional	String representing the type of source for the parameter value. The acceptable values are: REFER_CMD_DEF RUNTIME PROVIDED DEFAULT_PROVIDED IMPLICIT_CNS NOTES: If not specified, the REFER_CMD_DEF PROVIDED value is taken by default. If RUNTIME is specified, the AffectedProperty data must be set. If PROVIDED or DEFAULT_PROVIDED is specified, the Value data must be set. In all cases where the specified value is different from PROVIDED or DEFAULT_PROVIDED, the Value data is ignored.
Value	Optional	The value of the parameter. NOTE: The value must be expressed according to the CultureInfo.InvariantCulture.
Control	Optional	String representing the type of user control to be used in the user interface. Possible settings are: NUMERIC DROPDOWN STRING DATETIME PASSWORD NOTE: If not specified, the STRING value is taken by default.
AffectedProperty	Optional	Name of the affected property. NOTES: If the affected property is part of a structure or a reference, the complete name must be specified (<name of structure>.<name of property> - for example: “Struct_Value.Int_Value”). If the affected property is an element of a set, the name must be composed by the set name and the property index (<set name>[<index>] – for example: “SetChar_Value[1]”). Note that the index starts with “1”. The affected property must be compatible with the type of the parameter specified in the command definition. If a command has more than one parameter, the affected property can be specified on one of the parameters only.
FilterProperty	Optional	Name of the filter property. NOTE: The type of the property indicated must be ARRAYUINT (dynamic array of unsigned integers).
Application	Optional	String representing the type of application. Possible settings are: PROPERTY INDEX NOTE: If not specified, the PROPERTY value is taken by default.

Example of command definition for a DPE:

{

"Name": "Int_Value",

"PvssType": {

"PvssType": "INT",

"Status": {

"Stat": true,

"DisplOffNormal": true,

"NormalValue": 20

}

"VL": true,

"AL": true,

"DL0": true,

"DL1": true,

"DL2": true,

"DL3": true,

"Persist": true,

"GroupId": "CONFIG",

"Description": [ { "Culture": "en-US", "Text": "Integer Value" } ],

"Display": {

"Valid": true,

"Icon": {

"Library": "Global_Base_HQ_1",

"Name": "Op_DP_Generic_None_001.png"

}

"GmsType": {

"GmsType": "GMSINT",

"Attributes": {

"Valid": true,

"UnitText": {

"TextGroup": "TxG_EngineeringUnits",

"Unit": "°C"

"Properties": {

"Min": -40,

"Max": 70

}

"Commands": {

"Dependency1": "UInt_Value",

"CommandsData": [

{

"CommandType": "GenericWriteInt",

"Name": "Write",

"Label": [ { "Culture": "en-US", "Text": "WriteInt" } ],

"Guid": "",

"Dependencies": [

{

"Property": "UInt_Value",

"Operation": "=",

"Value1": 10

}

"Alias": 0,

"Group": "STANDARD",

"Control": "DEFAULT",

"Combined": false,

"Display": "GENERIC_DISPLAY_SOFTWARE",

"TargetedProperty": "",

"Logging": "ALWAYS",

"Parameters": [

{

"Name": "Value",

"Label": [ { "Culture": "en-US", "Text": "ValueForInt" } ],

"DefaultValue": "PROVIDED",

"Value": 15,

"Control": "NUMERIC",

"AffectedProperty": "",

"Application": "PROPERTY"

}

]

}

]

}

Alarms Configuration

The JSON file can also contain the alarms configuration.

The alarms definition is a part of the configuration of the DPE configuration (see Data Point Element Configuration).

NOTICE

In case of re-import:

- All the alarms defined for a DPE must be specified.

To configure alarms, it is possible to specify the following properties:

Commands Properties
Property	Use	Description
Valid	Optional	Validity flag. If false, the alarms are set but considered invalid.
AlarmsConfiguration	Optional	Alarms configuration, which can be one of the following: None (see None Alarms Configuration) Field System (see Field System Alarms Configuration) Management Station (see Management Station Alarms Configuration)

Alarm Configuration – None

To define no alarm configuration, the following can be specified:

Data	Use	Setting
Type	Mandatory	NONE

Example

"Alarms": {

"Valid": true,

"AlarmsConfiguration": { "Type": "NONE" }

}

In case of a re-import, this definition can be used to remove an existing alarm configuration.

The following image shows the corresponding settings in the Models & Functions tab:

Alarm Configuration –Field System

Field system alarms can be configured only for simple properties, no array, of the following GMS and PVSS types:

GMSBOOL
GMSREAL
GMSENUM
GMSINT (only if based on INT data type)
GMSUINT (only if based on UINT data type)
GMSINT64
GMSUIN64
BOOL
FLOAT
INT
UINT
LONG
ULONG

To define field system alarms, the following can be specified:

Data

Use

Description

Type

Mandatory

FIELDSYSTEM

TableReference

Mandatory

Name of the event table.

NOTE 1: In case of empty string (“TableReference”: “”), the default value is assumed.

NOTE 2: The name specified here must correspond to the name of a data point of type “GmsAlarmTable_Driver” already present in the project. If the specified name does not correspond to a data point in the project, the default (empty string: “”) value is assumed.

NOTE 3: The name specified here can or cannot have the suffix “.AlarmTable”. In the last case, the suffix will be automatically added.

Example

"Alarms": {

"Valid": true,

"AlarmsConfiguration": {

"Type": "FIELDSYSTEM",

"TableReference": "Alt_BACnetStandard"

}

The following image shows the corresponding settings in the Models & Functions tab:

Alarm Configuration – Management Station

To define management station alarms, the following can be specified:

Alarms Configuration – Management Station
Data	Use	Description
Type	Mandatory	MANAGEMENTSTATION
Activated	Optional	True, to activate the alarm configuration. If not specified, the value false is assumed.
AlarmsDefinition	Mandatory	Management station alarms definition, which can be one of the following: Discrete Alarms Continuous Alarms

Discrete Alarms

Discrete alarms can be configured only for simple properties, no array, of the following GMS and PVSS types:

GMSBOOL
GMSREAL
GMSENUM
GMSINT (only if based on INT data)
GMSUINT (only if based on UINT data type)
GMSINT64
GMSUIN64
GMSBITSTRING (only if based on BIT data type)
GMSBITSTRING64 (only if based on BIT64 data type)
BOOL
FLOAT
INT
UINT
LONG
ULONG
BIT
BIT64

To define discrete alarms the following can be specified:

Data	Use	Description
Kind	Mandatory	DISCRETE
Flags	Optional	String representing the type of user control to be used by the user interface. Acceptable values are: None NoAlarmOnDriverInvalid NoAlarmOnSourceTimeInvalid If not specified or the string is empty, the value None is assumed as default.
AlarmsTable	Mandatory	List of alarm conditions, which must meet the following rules: The list must contain at least an entry representing the normal condition and another entry representing an alarm condition. It is possible to define only one entry representing the normal condition. The list can contain a maximum of twenty alarm conditions. In case of BOOL property, only two alarm conditions can be configured. For details about the definition of discrete alarm conditions, see Management Station – Discrete Alarm Condition. In case of re-import, all the required alarm conditions must be specified. Any other alarm conditions already existing and not specified in the file will be removed. For details about alarm conditions re-import, see Guid in Management Station – Discrete Alarm Condition.

Discrete Alarms – Condition

For each alarm condition it is necessary to specify the following:

Data	Use	Description
AlarmClass	Mandatory	String representing the alarm class. The name specified must correspond to the name of a data point of type “_GMS_ALARM_TYPE” already present in the project. The empty string (“AlarmClass”: “”) defines the normal condition.
AlarmProperty	Optional	Specifies the operand and the value of the alarm condition (Value Range). In case of normal condition, this data is ignored and can be omitted. In all the other alarm conditions it is necessary to specify it. For details about the configuration, see Discrete Alarms – AlarmProperty.
OffNormalText	Optional	List of values used as alarm text for incoming events. Each value must contain the following data: Culture: culture of the text (for example, “en-US”). Text: descriptive text.
NormalText	Optional	List of values used as alarm text for outgoing events. Each value must contain the following data: Culture: culture of the text (for example, “en-US”). Text: descriptive text.
Guid	Optional	String representing the alarm condition. NOTE: The value of this string is automatically assigned by the system when the alarm condition is created the first time. The value must not be set manually. When an object model is imported the first time, all the alarm conditions specified for its properties do not have the Guid or the Guid must be declared but empty (“Guid”: “”). In this case, the importer creates a new alarm condition. If an object model is exported, the Guid contains the value automatically assigned by the system. This value must not be changed otherwise the alarm condition can no longer be recognized in case of re-import. In case of re-import: If the Guid is not specified or it is empty (“Guid”: “”), the alarm condition is created or re-created. If the Guid is specified and matches the one of an existing alarm condition, the existing alarm condition is updated. If the Guid is specified but it does not match the one of an existing alarm condition, the alarm condition is ignored. All the alarm conditions already existing that are not updated, using the matching Guid mechanism, will be removed. In case a previously created alarm condition must be removed, it is necessary to remove the alarm condition from the alarm conditions list.

Discrete Alarms – AlarmProperty

To configure the AlarmProperty it is possible to specify the following:

Data	Use	Description
Operation	Optional	The condition operand for reporting an event. The valid operands vary according to the data type of the property. For details, see Discrete Alarms – Operation. If not specified or the string is empty, the value NOOP is assumed as default.
Value1	Optional	First value of the condition. The value must comply with the property data type. In case of PvssBit32, PvssBit64, GmsBitString and GmsBitString64 the values can be expressed as uint (or ulong) or as string representing the binary value (for example, 255 or “00000000000000000000000011111111” or “11111111”). In case of GmsEnum the value can be expressed as uint representing the index of a text in the text group associated to the property or as string representing a text of the text group. The string must be written in the Desigo CC default language (en-US). The operation NoOpNoValue is converted to NoOp. In case of NoOp operation, the value is ignored. Depending on the specified operation, the value can be configured in different ways. For more details, see Discrete Alarms – Value.
Value2	Optional	Second value of the condition. For this value the same rules as Value1 apply. In case of GmsBitString and GmsBitString64, this value represents the bit mask defining the bits to be considered. If this value is not specified, the bit mask is evaluated according the configured first bit and the last bit. In case also the first bit and last bit are not configured, the bit mask is set to 0. In case of PvssBit32, PvssBit64, this value is ignored, and the bit mask is automatically set to UInt32.MaxValue and UInt64.MaxValue.

Discrete Alarms – Operation

Operation String	Description	Property Types
NoOp	No Operator	All types
=	Equal	eGmsDataType.PvssBool eGmsDataType.PvssBit32 eGmsDataType.PvssBit64 eGmsDataType.GmsBool eGmsDataType.GmsBitString eGmsDataType.GmsBitString64
!=	Not Equal	eGmsDataType.PvssBit32 eGmsDataType.PvssBit64 eGmsDataType.GmsBitString eGmsDataType.GmsBitString64
\|	Or	eGmsDataType.PvssUint
!\|	Nor	eGmsDataType.PvssUint64 eGmsDataType.PvssInt eGmsDataType.PvssInt64 eGmsDataType.PvssFloat eGmsDataType.GmsUint eGmsDataType.GmsUint64 eGmsDataType.GmsInt eGmsDataType.GmsInt64 eGmsDataType.GmsReal eGmsDataType.GmsEnum
..	In range	eGmsDataType.PvssUint
!..	Not in range	eGmsDataType.PvssUint64 eGmsDataType.PvssInt eGmsDataType.PvssInt64 eGmsDataType.PvssFloat eGmsDataType.GmsUint eGmsDataType.GmsUint64 eGmsDataType.GmsInt eGmsDataType.GmsInt64 eGmsDataType.GmsReal

Discrete Alarms – Value

Operation String	Operation Description	Value1	Value2	Value Format
No Op	No Operator	Ignored	Ignored	-
=	Equal	Yes	No eGmsDataType.PvssBool eGmsDataType.PvssBit32 eGmsDataType.PvssBit64 eGmsDataType.GmsBool Yes eGmsDataType.GmsBitString eGmsDataType.GmsBitString64	A single value consistent with the data type of the property. Examples: "Value1": true "Value1": 255
!=	Not equal	Yes
\|	Or	Yes	No	A single value consistent with the data type of the property. An array of values, where each value must be consistent with the data type of the property. Examples: "Value1": 90 "Value1": [7, 8, 10]
!\|	Nor	Yes	No
..	In range	Yes	Yes	Two single values, each one must be consistent with the data type of the property. The first value must be less than the second value. Examples: "Value1": 10, "Value2": 20
!..	Not in range	Yes	Yes

Example

{

"Name": "Enum_Value",

"PvssType": { "PvssType": "UINT" },

"VL": true,

"AL": true,

"Stat": true,

"Persist": true,

"GroupId": "CONFIG",

"Description": [ { "Culture": "en-US", "Text": "Enum Value" } ],

"Display": {

"Valid": true,

"Icon": { "Library": "Global_Base_HQ_1", "Name": "Op_DP_Generic_None_001.png" }

"GmsType": {

"GmsType": "GMSENUM",

"Attributes": {

"Valid": true,

"Properties": { "Min": 0, "Max": 5 },

"TextGroup": "TxG_DriverStatus"

}

"Alarms": {

"Valid": true,

"AlarmsConfiguration": {

"Type": "MANAGEMENTSTATION",

"Activated": true,

"AlarmsDefinition": {

"Kind": "DISCRETE",

"Flags": "None",

"AlarmsTable": [

{ "AlarmClass": "" },

{

"AlarmClass": "Anomaly",

"AlarmProperty": { "Operation": "|", "Value1": [0, 3, 5] },

"OffNormalText": [ { "Culture": "en-US", "Text": "Off Normal Text" } ],

"NormalText": [ { "Culture": "en-US", "Text": "Normal Text" } ]

}

]

}

The following image shows the corresponding settings in the Models & Functions tab:

Continuous Alarms

Continuous alarms can be configured only for simple properties, no array, of the following GMS and PVSS types:

GMSBOOL
GMSREAL
GMSENUM
GMSINT (only if based on INT data type)
GMSUINT (only if based on UINT data type)
GMSINT64
GMSUIN64
BOOL
FLOAT
INT
UINT
LONG
ULONG

To define continuous alarms the following can be specified:

Data

Use

Description

Kind

Mandatory

CONTINUOUS

AlarmsTable

Mandatory

List of alarm conditions.

This list must comply with the following rules:

The list must contain at least an entry representing the normal condition and another entry representing an alarm (off normal) condition.
It is possible to define only one entry representing the normal condition.
The list can contain a maximum of twenty alarm conditions.
In case of BOOL property, only two alarm conditions can be configured.
The order of the alarm conditions is important because alarm processing is carried out from bottom to top.

For details about the definition of an alarm condition, see Management Station - Continuous Alarms Condition.

In case of re-import, all the required alarm conditions must be specified. Any other alarm conditions already existing and not specified in the file will be removed.

For details about the alarm conditions reimport, see Guid in Management Station - Continuous Alarms Condition.

Continuous Alarms – Condition

For each alarm condition it is necessary to specify the following:

Data	Use	Description
AlarmClass	Mandatory	String representing the alarm class. The name specified must correspond to the name of a data point of type “_GMS_ALARM_TYPE” already present in the project. The empty string (“AlarmClass”: “”) defines the normal condition.
AlarmProperty	Optional	Specifies the operand and the value of the alarm condition (Value Range). In case of normal condition, this data is ignored and can be omitted. In all the other alarm conditions it is necessary to specify it. For details about the configuration, see Continuous Alarms – AlarmProperty.
UpperHysteresis	Optional	Specifies the operand and the upper hysteresis value for this alarm condition. In case of normal condition, this data is ignored. For details about the configuration, see Continuous Alarms – UpperHysteresis and LowerHysteresis.
LowerHysteresis	Optional	Specifies the operand and the lower hysteresis value for this alarm condition. In case of normal condition, this data is ignored. For details about the configuration, see Continuous Alarms – UpperHysteresis and LowerHysteresis.
OffNormalText	Optional	List of values used as alarm text for incoming events. Each value must contain the following data: Culture: culture of the text (for example, “en-US”). Text: descriptive text.
NormalText	Optional	List of values used as alarm text for outgoing events. Each value must contain the following data: Culture: culture of the text (for example, “en-US”). Text: descriptive text.
Guid	Optional	String representing the alarm condition. NOTE: The value of this string is automatically assigned by the system when the alarm condition is created the first time. The value must not be set manually. When an object model is imported the first time, all the alarm conditions specified for its properties do not have the Guid or the Guid must be declared but empty (“Guid”: “”). In this case, the importer creates a new alarm condition. If an object model is exported, the Guid contains the value automatically assigned by the system. This value must not be changed otherwise the alarm condition can no longer be recognized in case of re-import. In case of re-import: If the Guid is not specified or it is empty (“Guid”: “”), the alarm condition is created or re-created. If the Guid is specified and matches the one of an existing alarm condition, the existing alarm condition is updated. If the Guid is specified but it does not match the one of an existing alarm condition, the alarm condition is ignored. All the alarm conditions already existing that are not updated, using the matching Guid mechanism, will be removed. In case a previously created alarm condition must be removed, it is necessary to remove the alarm condition from the alarm conditions list.

Continuous Alarms – AlarmProperty

To configure the AlarmProperty it is possible to specify the following:

Data

Use

Description

Operation

Optional

The condition operand for reporting an event.

The valid operands vary according to the data type of the property. For details, see Continuous Alarms – Operation.

If not specified or the string is empty, the value NOOP is assumed as default.

Value1

Optional

Value of the condition.

The value must comply with the property data type:

In case of GmsEnum the value can be expressed as uint representing the index of a text in the text group associated to the property or as a string representing a text of the text group. The string must be written in the Desigo CC default language (en-US).

In case of NoOp operation, the value is ignored.

Depending on the specified operation, the value can be configured in different ways. For more details, see Continuous Alarms – Value.

Continuous Alarms – Operation

Operation String	Description	Property Types
NoOp	No Operator	All types
=	Equal to	eGmsDataType.PvssBool eGmsDataType.GmsBool
>	Greater than	eGmsDataType.PvssUint eGmsDataType.PvssUint64 eGmsDataType.PvssInt eGmsDataType.PvssInt64 eGmsDataType.PvssFloat eGmsDataType.GmsUint eGmsDataType.GmsUint64 eGmsDataType.GmsInt eGmsDataType.GmsInt64 eGmsDataType.GmsReal eGmsDataType.GmsEnum
>=	Greater than or equal to
<	Less than
<=	Less than or equal to

Continuous Alarms – Value

Operation String	Operation Description	Value1	Value Format
No Op	No Operator	Ignored	-
=	Equal to	Yes	A single Boolean value. Examples: "Value1": true
>	Greater than	Yes	A single value consistent with the data type of the property. Examples: "Value1": 90 "Value1": "Failed"
>=	Greater than or equal to
<	Less than
<=	Less than or equal to

Continuous Alarms – UpperHysteresis and LowerHysteresis

To configure UpperHysteresis or LowerHysteresis it is possible to specify the following:

Data

Use

Description

Operation

Optional

The operand for the hysteresis value.

The valid operands vary according to the data type of the property. For details, see Continuous Alarms – Hysteresis Operation.

If not specified or the string is empty, the value NoOpNoValue is assumed as default.

Value1

Optional

Value of the hysteresis.

The value must comply with the property data type:

In case of PvssUInt, PvssInt, GmsUint, or GmsInt property, the hysteresis value must be of int type.
In case of PvssUInt64, PvssInt64, GmsUint64, or GmsInt64 property, the hysteresis value must be of long type.
In case of PvssFloat or GmsReal property, the hysteresis value must be of double type.

In case of NoOpNoValue operation, the value is ignored.

Depending on the specified operation, the value can be configured in different ways. For more details, see Continuous Alarms – Hysteresis Value.

Continuous Alarms – Hysteresis Operation

Operation String	Description	Property Types
NoOpNoValue	No Operator	eGmsDataType.PvssUint eGmsDataType.PvssUint64 eGmsDataType.PvssInt eGmsDataType.PvssInt64 eGmsDataType.PvssFloat eGmsDataType.GmsUint eGmsDataType.GmsUint64 eGmsDataType.GmsInt eGmsDataType.GmsInt64 eGmsDataType.GmsReal eGmsDataType.GmsEnum
=	Equal	eGmsDataType.PvssBool eGmsDataType.GmsBool eGmsDataType.PvssUint eGmsDataType.PvssUint64 eGmsDataType.PvssInt eGmsDataType.PvssInt64 eGmsDataType.PvssFloat eGmsDataType.GmsUint eGmsDataType.GmsUint64 eGmsDataType.GmsInt eGmsDataType.GmsInt64 eGmsDataType.GmsReal eGmsDataType.GmsEnum

Continuous Alarms – Hysteresis Value

Operation String

Operation Description

Value1

Value Format

NoOpNoValue

No Operator

Ignored

Equal

Yes

A single value consistent with the data type of the property.

Examples:

"Value1": 90

Example

{

"Name": "Int_Value",

"PvssType": {

"PvssType": "INT",

"Status": { "Stat": true, "DisplOffNormal": true, "NormalValue": 0 }

"VL": true,

"AL": true,

"DL0": true,

"DL1": true,

"DL2": true,

"DL3": true,

"DL4": true,

"Persist": true,

"GroupId": "CONFIG",

"Description": [ { "Culture": "en-US", "Text": "Integer Value" } ],

"Display": {

"Valid": true,

"Icon": { "Library": "Global_Base_HQ_1", "Name": "Op_DP_Generic_None_001.png" }

"GmsType": {

"GmsType": "GMSINT",

"Attributes": {

"Valid": true,

"UnitText": { "TextGroup": "TxG_EngineeringUnits ", "Unit": "°C" },

"Properties":{ "Min": -100, "Max": 100 }

}

"Alarms": {

"Valid": true,

"AlarmsConfiguration": {

"Type": "MANAGEMENTSTATION",

"Activated": true,

"AlarmsDefinition": {

"Kind": "CONTINUOUS",

"Flags": "None",

"AlarmsTable": [

{ "AlarmClass": "" },

{

"AlarmClass": "Alarm",

"AlarmProperty": { "Operation": "<", "Value1": 10 },

"UpperHysteresis": { "Operation": "=", "Value1": 4 },

"LowerHysteresis": { "Operation": "=", "Value1": -2 },

"OffNormalText": [ { "Culture": "en-US", "Text": "Low value" } ],

"NormalText": [ { "Culture": "en-US", "Text": "Low value returned to normal" } ]

{

"AlarmClass": "Alarm",

"AlarmProperty": { "Operation": ">=", "Value1": 50 },

"UpperHysteresis": { "Operation": "=", "Value1": 5 },

"OffNormalText": [ { "Culture": "en-US", "Text": "High value" } ],

"NormalText": [ { "Culture": "en-US", "Text": "High value returned to normal" } ]

}

]

}

The following image shows the corresponding settings in the Models & Functions tab: