NK823x Objects
In System Browser, the representation of NK823x includes a base and an optional set of objects.
The basic set is automatically created when you create an NK823x unit and assign a BACnet Instance number to it (refer to Connecting to the NK823x Unit). These objects represent components that are always present in any NK823x configuration.
You can then add optional objects a necessary to match your actual system (refer to Configuring the NK823x Unit). These components may or may not be present depending on the hardware configuration.
Object | Object (nested level) | Engineering - Primary pane | Operating - Operation and Extended Operation in Contextual pane |
COM1 |
| Configure the panel/device connected to serial port 1 | Get serial 1 port status |
COM2 |
| Configure the panel/device connected to serial port 2 | Get serial 2 port status |
Device NK823x Ethernet Port |
| If required, adjust the BACnet parameters | Get BACnet communication status |
Ethernet 1 |
| Read the IP settings of the Ethernet adapter 1 | Get status and IP settings of the Ethernet adapter 1 |
| BACnet Protocol | If required, adjust the BACnet protocol parameters | Get BACnet protocol status |
I/O |
| Expand/collapse Input/Output list | - |
| Event Enrollment | No action required. Internally used to handle the Output events. | - |
| Input 1 | Set No or NC | Get input 1 status |
| Input 2 | Set No or NC | Get input 2 status |
| Input 3 | Set No or NC | Get input 3 status |
| Output | - | Get output status. Activate/Deactivate output. |
I2C |
| Configure the DF8000 connected to I2C port |
|
License |
| - | Get license status |
Logging |
| - | Get logging status |
Software |
| - | Get NK823x software status |
Tamper |
| - | Get tamper status. Enable/Disable tamper protection. |
Object | Object (nested level) | Configuration | Application |
COM3 |
| Configure the panel/device connected to serial port 3 | Get serial 3 port status |
COM4 |
| Configure the panel/device connected to serial port 4 | Get serial 4 port status |
Ethernet 2 |
| Read the IP settings of the Ethernet adapter 2 | Get status and IP settings of the Ethernet adapter 2 |
