Troubleshooting Fibrolaser III

The following section describes how to handle common import error conditions.

Troubleshooting Modbus Integration

Message

Situation

Do the following...

“Issue found during the import” error loading the CSV import file.

The selected CSV import file cannot be loaded by the Desigo CC importer.

Verify that the CSV file uses a comma (,) character as separator. Any other character will result in an invalid file format.

There are warnings or errors, look at the log file.

The configuration file selected for the import is invalid.

In the Import tab, click Analysis Log and check the pre-import log.

Try again using another configuration file.

Message	Situation	Do the following...
`“The file does not contain servers data! There are warnings or errors, look at the log file” error loading the CSV import file`	The selected CSV import file cannot be loaded by the Desigo CC importer.	Verify that the CSV file uses a comma (,) character as separator. Any other character will result in an invalid file format.
No specific error message displays.	The CSV import file is completed successfully, but no point instances are created under the OPC network.	Re-import the same file. The OPC instances will be created under the OPC network.
No specific error message displays.	The configuration file selected for the import is invalid.	In the Import tab, click Analysis Log and check the pre-import log. Try again using another configuration file.